Estimation of Motor HP

Use this forum to discuss any general matters that do not fit into any other forum.

Estimation of Motor HP

Postby clivep » Tue Nov 30, 2021 12:36 am

I have a smallish DC motor made by Siba. It's about the size of an old fashioned car dynamo and is a 4 pole series wound machine. Spec plate says Type TM 3008E 12/24 volts. I've put it on a power supply. at 12 volts it runs at 4900 rpm and at 24 volts 8600 rpm both unloaded. It draws 8 amps at both voltages.

Without putting a physical load on it, is there any way to estimate the HP rating of the motor?

I'm guessing 1/4 to 1/2 HP. It's about 30 years old and unused but I can find no info on the internet about it.

Any thoughts welcome.

Clive
Attachments
s-l1600c (Small).jpg
s-l1600c (Small).jpg (39.86 KiB) Viewed 515 times
s-l1600 (Small).jpg
s-l1600 (Small).jpg (55.35 KiB) Viewed 515 times
clivep
 
Posts: 89
Joined: Wed Sep 30, 2009 10:01 am
Location: West London

Return to General discussion

Who is online

Users browsing this forum: No registered users and 1 guest

cron